Classic arboreal enclosures with LED for jumping spiders
incl. VAT, plus shipping
Delivery Time 1 - 2 Weeks
Stackable 3D printed enclosure with plexiglass plates.
The Classic enclosures comes with classic colors like black, white and many others
The bottom is reinforced and completely closed.
The enclosure is splash water tight, misting water is perfectly fine.
The walls are made of plexiglass and the base is made of plastic, which makes them lightweight.
The integrated heat mat (optional) is specially designed to get your ELF classic enclosure to the right temperature in a fairly cold room, the integrated LED light itself gives some warmth but with the added heat mat it will give the right temperature.
The holder of the heat mat contains ventilation.
ELF offers two different types of heat mats:
The 10 step heat mat specifications
- 5 w
- 220-240v
- 2 meter cable
- EU plug
- 10 step adjustable
The heat mat specifications
- 5 w
- 220-240v
- 1,5 meter cable
- EU plug
If you stack the ELF classic enclosures, the temperature will rise to 30-31C, without stacking it will be around 27-28C with the setting op max (10). (this is tested on room temperature 19-20C)
The 10 step heat mat doesn't work on a timer, the normal heat mat works on a timer.
Unfortunately there are not all matching colors available for the holder because of different material.
Always keep an eye on the temperature and keep the back of the enclosure not to close to other objects.
Don't block the heat mat from the rear, this can deform the enclosure due to heat.
The heater is adjustable in 10 steps, you can adjust it to the right temperature.
Here you can purchase the magnetic holder to monitor the temperature.
Guarantee expires when objects are placed on top of the LED light, the LED light may overheat with blocking ventilation and will malfuntion.
Take notice! Because it's 3D printed minor imperfections can occur.
Don't put a single heat mat directly on the colored filament of the enclosure, PLA is not made for high temperatures and will deform.
Product Information
Stackable 3D printed enclosures with LED light.
Guarantee expires when objects are placed on top of the LED light, the LED light may overheat with blocking ventilation and will malfuntion.
Lack of ventilation can cause mold and bacteria to grow.
Our enclosures have cross ventilation and prevent that.
Jumping spiders are known to make their webbing in the top area of the enclosure.
Our enclosures got a front opening to avoid breaking the web and it´s easy accessable.
The LED lighting comes with a 1.8 meter cable, switch and USB connection. Lighting is warm white (2700-3500K) and has a power of 2W.
When the light is on, it will be 30ºC directly underneath the light, the spiders love it!
The LED light cannot be used as a heat source, add a heat mat when necessary.
The LED lights have a lifetime of 10.000 hours, we can offer replacement when it's necessary.
The temperature in the terrarium will increase by 1 to 2 degrees when the light is on.
Dimensions
18x17x20,5 cm
Special Instructions
- Use descaled water when misting the enclosure to avoid lime scale.
- While cleaning, only use water and a soft cloth to avoid scratches.
- Avoid direct sunlight.
- Not designed to stack any other objects than the same type of enclosures.
- Not suitable for slings i2 & i3 due to escape.