Heat mat + holder for existing ELF Classic enclosures

The heat mat holder is specially designed to get your ELF classic enclosure to the right temperature in a fairly cold room, the integrated LED light itself gives some warmth but with the added heat mat it will give the right temperature.
Be aware that the holder is not vented towards the inside of the enclosure like the optional holder does, therefore it doesn´t get as warm in the enclosure as the built in version.

The holder is only suitable if you own already an built ELF Classic enclosure.

The heat mat specifications
- 5 w
- 220-240v
- 2 meter cable
- EU plug
 - 10 step adjustable

If you stack the ELF classic enclosures, the temperature will rise to 26C at the back with the setting op max (10). (this is tested on room temperature 19-20C)

Unfortunately there are not all  matching colors available for the holder because of different material.

Always keep an eye on the temperature and keep the back of the enclosure not to close to other objects.
Don't block the heat mat from the rear, this can deform the enclosure due to heat.

The heater is adjustable in 10 steps, you can adjust it to the right temperature.
Here you can purchase the magnetic holder to monitor the temperature.

The heat mat holder is snap fitted to the ELF classic aboreal enclosures.
To install it, use the flexibility of the holder to click it behind the back pilars of the enclosure (see video).

I highly recommend to watch the video before installing the holder.

Be sure not to put pressure on the enclosure itself. Parts may get damaged or broken.
- Don't put pressure on the back pilars with the holder or your fingers
- Don't push against the plexiglass plates.
- Don't overflex the heatmat holder to avoid plastic deformation.

Eightlegged fluffs is not responsiblefor damaged parts with installing